Who Pays for a Water Leak in Sectional Title?
Section or common property, one meter or many: how leak responsibility usually splits in a complex, and how a methodical investigation traces a leak to one unit.
A leak in a townhouse complex or apartment block raises two questions at once: where is the water going, and who is going to pay to fix it? In a sectional title scheme the answer depends on where the leaking pipe is and what it serves, which is why finding the leak precisely matters as much as fixing it.
This guide explains how responsibility usually works. It is general information, not legal advice. Every scheme has its own rules, so check yours, and speak to your managing agent or a sectional title attorney if there is a dispute.
The Basic Principle: Section vs Common Property
A sectional title scheme is split into sections (the units owned by individual owners) and common property (everything else, owned jointly through the body corporate). The Sectional Titles Schemes Management Act and the rules made under it set out who maintains what.
As a general guide:
- Pipes that serve only your section are usually your responsibility to maintain and repair, even when they run outside your unit's walls.
- Pipes that serve more than one section, or the common property, are usually the body corporate's responsibility.
- Damage caused by a leak is often handled through the scheme's building insurance, subject to the policy terms and the excess, and the scheme's rules may say who carries the excess.
The details vary. Some schemes have conduct or management rules that allocate specific items, such as geysers, differently. Your scheme's rules and the building insurance policy are the documents to read.
Why "Whose Pipe Is It?" Is Often the Hard Part
In most complexes the pipework isn't drawn on any plan anyone can find. Lines run under shared paving, through walls between units and across the roof space. A damp patch in one unit can come from a pipe in the unit above, or from a common line running through the wall.
Many complexes also have a single bulk water meter. When the meter shows a loss, every owner pays for it through the levy until someone finds the leak.
That is why a proper leak investigation is the first step, before anyone accepts or denies responsibility.
How a Leak Is Traced to a Specific Unit or Line
A methodical leak investigation in a complex usually works like this:
- Confirm the loss on the meter with water use stopped as far as possible.
- Isolate units one at a time. Each unit's isolating valve is closed in turn while the meter is watched. If closing one unit's valve stops the loss, the leak is on that unit's side.
- If no unit stops the loss, the leak is on the common reticulation, and the search moves to the shared lines.
- Pinpoint the leak with acoustic equipment, tracer gas or thermal imaging, depending on the pipe material and where it runs.
- Document everything: the meter readings, the isolation sequence and the exact location of the leak, so the trustees have clear evidence.
Our leak detection for body corporates and estates guide goes into more detail, and commercial leak detection covers larger schemes.
Practical Tips for Owners and Trustees
- Act on a rising bulk meter quickly. A complex-wide leak is paid for by every owner until it's found.
- Know where the isolating valves are. A schematic showing each unit's valve and the main lines saves time and money on every future leak.
- Report damp early. A small damp patch is cheaper to trace than a collapsed ceiling.
- Keep the paperwork. Leak reports, repair invoices and photos help with insurance claims and with any later dispute.
- Check the rules before the argument starts. Most disputes come from assumptions about who is responsible.
Frequently Asked Questions
Q: The leak is in my unit's pipe but it damaged my neighbour's unit. Who pays for the damage? A: It depends on the scheme's building insurance and rules. Resulting damage is often claimed through the scheme's insurance, with the excess allocated according to the rules. The leaking pipe itself is usually the responsibility of whoever it serves.
Q: Who pays for the leak detection? A: Whoever books it pays the invoice. Often the body corporate books the investigation when the bulk meter shows a loss, and the scheme's rules or the trustees decide whether the cost is recovered from an owner once the leak is found on their side.
Q: Our complex has one meter. Can a single unit's leak be identified? A: Yes. Closing each unit's isolating valve in turn while watching the meter identifies the unit responsible, or shows that the leak is on the common lines.
Q: Is the geyser the owner's or the body corporate's responsibility? A: A geyser that serves only one unit is usually treated as the owner's, but schemes differ and the building insurance often covers geyser bursts. Check your scheme's rules and policy.
